Flowserve QX Limitorque Manual do Utilizador descarregar pdf (Página 17)

Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11

ﬂowserve.com

Step 6

Reconnect incoming power leads L1, L2, L3, and control wiring to the terminal block. Restore power source when

ready for operation.

3.2 Actuator Removal with Type A1/A1E Base (Thrust) – QXM only

3.2.1 Optional Thrust Base Assembly QX-1 & 2

Table 3.2 - Optional Thrust Base Assembly

ITEM NUMBER DESCRIPTION QTY.

16-10 TORQUE NUT 1

16-11 BUSHING 1

16-12 O'-RING 1

16-13 O'-RING 1

16-14 ADAPTER PLATE 1

16-15 SOCKET HEAD CAP SCREWS 4

16-16 SPACER, PILOT, ISO ONLY 1

16-17 THRUST BASE ASSEMBLY 1

Figure 3.3 - Optional Thrust Base Assembly

3.2.2 Optional thrust base assembly removal.

Step 1

Remove the four (4) screws (# ) and remove the thrust base subassembly (#16-17) by sliding the base down. If base

is ISO remove the spacer (pilot) (#16-16).

Step 2

Remove the four (4) screws (# 16-15) and remove the adapter plate (#16-14) and torque nut (#16-10). Item (#16-11)

bushing is pressed into adapter plate and cannot be removed. The torque nut is held in place by the unit drive sleeve

and the bushing (#16-11).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Sem comentários

Flowserve QX Limitorque Manual do Utilizador Página 17