Flowserve MX Limitorque Manual do Utilizador descarregar pdf (Página 88)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

STEP 6

Slide handwheel spacer (#1-9) over handwheel

adapter assembly, ensuring wave spring

(#1-10) is seated in groove of the handwheel

spacer.

1-10

1-9

STEP 7

Remount all removed subassemblies according to the remounting instructions in the following

order:

1. Drive sleeve (subassembly #2). (See Section 4.11.2.)

2. Base plate (subassembly. #11). (See Section 4.9.2.)

3. Worm shaft (subassembly. #3). (See Section 4.10.2.)

4. Motor (subassembly #4). (See Section 4.1.2.)

5. Top-mounted handwheel (#1-8). (See Section 4.3.2.)

NOTE: After completing handwheel assembly procedure, turn handwheel enough to ensure

wave spring is not pinched between actuator housing and handwheel spacer. If it is pinched,

remove handwheel (#1-8) and handwheel spacer (#1-9) to reseat the wave spring (#1-10) into

the grove on the handwheel spacer. Install handwheel.

6. Add oil.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 163 164

Sem comentários

Flowserve MX Limitorque Manual do Utilizador Página 88