Flowserve MX Limitorque Manual do Utilizador descarregar pdf (Página 47)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

ﬂowserve.com

4.4.4 Remounting

STEP 4

Check that bearing (#13-8) is correctly in place

in the actuator housing.

The MX-10 and -20 is a slip fit (4a).

The MX-85, -140, and -150 is a press fit (4b).

13-8

STEP 5

Insert the complete subassembly into the

actuator housing, rotating counterclockwise

(CCW) to properly mesh the gearing. Ensure

the end of the worm shaft is seated in the inner

bearing (#13-8).

STEP 6

Position the worm shaft cap (#13-2) back on

the actuator housing. Using a 6 mm hex key, fit

the (#13-9) screws onto the worm shaft cap to

secure side-mounted assembly to the actuator

housing.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 163 164

Sem comentários

Flowserve MX Limitorque Manual do Utilizador Página 47