Flowserve MX Limitorque Manual do Utilizador descarregar pdf (Página 70)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

4.9.2 Remounting

STEP 3

a

CAUTION: To ensure actuator is fully secured on mounting plate, ensure baseplate (#11-1)

is tightened with the following torque values on mounting screws (#11-5):

MX-05 and -10 = 12 ft-lb (16 N m)

MX-20 and -40 = 24 ft-lb (32 N m)

MX-85, -140, and -150 = 90 ft-lb (114 N m)

Lightly lubricate the outside of the drive sleeve,

the quad ring or seal (#11-3), and O-ring

(#11-4) before remounting baseplate.

11-3

11-4

STEP 4

NOTE: (MX-20 only) Match outer bosses of baseplate with outer bosses of actuator housing before

mounting baseplate assembly.

NOTE: (MX-85, -140, and -150) Match mounting holes in baseplate to housing taps. Baseplate and

housing has one hole/tap that is not equally spaced.

Carefully push the baseplate assembly onto the

end of the drive sleeve, ensuring that the quad

ring or seal (#11-3) is not damaged. Align the

mounting holes and secure the baseplate with

the screws (#11-5).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 163 164

Sem comentários

Flowserve MX Limitorque Manual do Utilizador Página 70