Flowserve MX Limitorque Manual do Utilizador descarregar pdf (Página 58)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

4.6 Converting Top-Mounted Handwheel

to Side-Mounted Handwheel

(MX-10, -20, and -40)

4.6.1 Removing Top-Mounted Handwheel

c

WARNING: Do not manually operate the actuator with devices other than the installed

handwheel and declutch lever. Using force beyond the ratings of the actuator and/or additive

forces such as cheater bars, wheel wrenches, pipe wrenches, or other devices on the actuator

handwheel or declutch lever may cause serious personal injury and/or damage to the actuator

and valve.

STEP 1

c

WARNING: Potential to operate while dangerous mechanical parts are exposed during

subassembly removal. To prevent injury, turn off all power sources to actuator before

removing side-mounted and top-mounted handwheel assembly. Power sources may

include main power or control power.

Drain oil from actuator using the lowest of three

plugs in your application mounting orientation.

NOTE: Oil removal is not necessary if actuator

is mounted on valve or other device with the

drive sleeve in a vertical position.

NOTE: MX-10 shown.

Oil Plug

Drains

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 163 164

Sem comentários

Flowserve MX Limitorque Manual do Utilizador Página 58