Flowserve SPECTORcontrol Manual do Utilizador descarregar pdf (Página 62)

Boiler Menu

Boiler

To enter boiler data press button in the menu Overview.

The graphical user interface is customized and corresponds to the schematic

representation of the boiler installation and its most important valves.

The following menu shows an example.

■ To enter or call up maintenance parameters

press .

■ To configure or evaluate the datalogs press

button .

■ To adjust or call up flowrates press button .

■ To go to the menu Burner press button .

Maintenance

1. In the menu Boiler press button .

2. The green input fields show the designa-

tions of the signals in question. The yellow

lamp at the left side indicates ON and the

grey lamp indicates OFF. The current op-

erating time (in min.) and the current

number of switching cycles for each signal

are highlighted in yellow. Currently active

alarms are directly indicated by red dots.

3. Click in the input field to establish or modify

the operating time and the switching fre-

quency.

Boiler

Logo

0.00 %

0.0

µS

Maintenance

Logo

Signal

0 : 00 0

Current values

Pump 1

0 : 00 0

Note

The on-times and switching frequencies of the selected digital inputs are

recorded by means of a cumulative time-meter.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 87 88

Sem comentários

Flowserve SPECTORcontrol Manual do Utilizador Página 62