Flowserve SPECTORcontrol Manual do Utilizador descarregar pdf (Página 45)

Controller Menu – continued –

Controller setup - continued -

6. Use the three controller buttons to activate the controller. An activated controller is

visually indicated in the menu Controller.

7. Use button Off to de-activate the controller.

8. If no controller type has been selected, the status indicator indicates Off. If a control-

ler has been selected, the respective button is highlighted in yellow and the status

indicator indicates On.

9. To configure the controller press button Continuous controller, button 2-pos. con-

troller or button 3-pos. controller.

Continuous controller setup

1. Press button Continuous controller in the menu Controller Setup.

2. The name of the controller is highlighted in

yellow.

3. The green input field Actual value shows

the actual value. Click in the input field to

show all established signals.

4. Select the signal that indicates the re-

quired parameters. For more information

on the setup and configuration of the

equipment see menu CAN Input and Ana-

log Input.

5. The green input field Setpoint shows the

setpoint element. The setpoint can be adjusted directly in the equipment or external-

ly, e. g. via a potentiometer.

6. To toggle between internal and external setpoint press button Internal setpoint/ Ex-

ternal setpoint.

7. To enter the signal for an external setpoint click in the green input field. All estab-

lished sensing elements will be indicated.

8. Select the signal that indicates the required parameters. For more information on the

setup and configuration of the equipment see menu CAN Input and Analog Input.

9. The green input field Manip. variable shows the manipulated variable element. To

select a signal for the manipulated variable click in the green input field. All adjusted

signals will be indicated.

10. Select the signal to which the manipulated variable shall be sent.

You will find the settings in the menu Analog Outputs.

Continuous

controller setup

Logo

MAX limit

Offset MIN limit

Position

Manip. variable

Actual value

Controller 1

Int. setpoint

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Comentários a estes Manuais

Sem comentários

Flowserve SPECTORcontrol Manual do Utilizador Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flowserve SPECTORcontrol