Flowserve Pac-Seal Type 51 Manual do Utilizador descarregar pdf

Resumo do Conteúdo

Installation InstructionsPac-Seal Type 51 and 52 Mechanical Shaft SealTM Experience In Motion

2Description The Pac-Seal Types 51 and 52 are similar to the Types 21 and 31 in design, with a crimped head and hex-torque drive system but with a mor

Página 3 - Part Reference Description

3 Part Reference Description 2 Seal Drive/Drive Band 14 Stationary Face/Mating Ring 15 Rotating Face/Primary Ring 16 Spring 28

Página 4 - 1 Equipment Check

1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly including, but not limited to, the following: • Lock out moto

Página 5

51.5 Thoroughly inspect and clean the seal chamber and shaft or pump sleeve. Inspect for corrosion or any defects. Remove all burrs, cuts, dents or d

Página 6

2.4 Lubricate inner diameter (ID) of the rotating seal head elastomer bellows with Pac-Ease. Note: For smaller diameter seals it may be easier to l

Página 7

72.6.1 For back-rst installations apply pressure to the outer diameter of the seal. Whenever possible even pressure should be applied to the outer d

Página 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.FIS219eng ORG 11/13 Printed in USAflowserve.comTo ﬁnd your local Flowserve representativeand ﬁnd out more about Flowserve

Modelos relacionados Pac-Seal Type 52

Comentários a estes Manuais

Sem comentários

Flowserve Pac-Seal Type 51 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Flowserve Pac-Seal Type 51. Flowserve Pac-Seal Type 51 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados Pac-Seal Type 52

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flowserve Pac-Seal Type 51