Flowserve Circpac HP Manual do Utilizador descarregar pdf

Installation

Instructions

Circpac HP

Experience In Motion

Segmented Circumferential Gas Seal for Gas Compressors

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Instructions

Installation InstructionsCircpac HPExperience In MotionSegmented Circumferential Gas Seal for Gas Compressors

Página 2 - 2 Brief Description

21 Precautions 1.1 Please read these instructions carefully. Installation in accordance with the following instructions will contribute to l

Página 3 - 3 Equipment Check

3 2.5.3 Minimum runout between the shaft and equipment housing. 2.5.4 Prevention of product sedimentation on the housing, shaft or

Página 4 - 4 Seal Installation

3.11 Seal chamber squareness to the shaft center line should be within 0.013 mm per 25.4 mm (0.0005 inch per 1 inch) shaft diameter. Note:

Página 5 - 5 Piping and Control System

4.10 Disengage setting plates and store separately. 4.11 Inspect equipment and driver alignment in accordance with coupling and/or equipme

Página 6

 5.3 Sizepipingsystemforrequiredowrates.Minimizerestrictionsand  determine total pressure drop(s) through piping system to ensure

Página 7 - 8 Repairs and Guarantee

7 Off-SitePerformanceTesting 7.1 Equipment manufacturers will often execute performance tests with   theCircpacHPinstalledonneworretr

Página 8 - TO REORDER REFER TO

TO REORDER REFER TOB/M #F.O.To nd your local Flowserve representativeand ﬁnd out more about Flowserve Corporation, visit www.ﬂowserve.comFIS174eng OR

Comentários a estes Manuais

Sem comentários

Flowserve Circpac HP Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Flowserve Circpac HP. Flowserve Circpac HP User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flowserve Circpac HP