Flowserve 2564 Mixerpac Manual do Utilizador

User Instruction- Translation of the Original- Mixerpac 2564Installation and Maintenance Instruction for Machinery PartsExperience in MotionTo seal*Ma

108.0 Starting Up the Machine ! Disengage setting plates of the MIXERPAC before start up the machine (see item 6.8). ! Parts of the MIXERPAC, which r

11Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Parts8.7 Frictional heat can be dissipated and deposits around the seal fa

12SYMPTOM CAUSEBarrier pressure increases- Defect barrier pressure setting.- Barrier fluid volume expands owing to heating (Cooling or forced venti

13Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Parts9.7 ! Follow the instructions for recommissioning of the machine, afte

1411.0 Maintenance, Replacement Parts; Aftersales Service11.1 Repairs must be conducted by FLOWSERVE within the guarantee period. In special cases (e

15Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Parts12.0 ANNEX12.1 Mounting and Removal Instructions for Shrink DiscsOute

16jacking procedure must be continued until a complete release of the outer ring is achieved. 3. Dismount shaft or draw off hub. Remove rust which ma

-21-flowserve.com© Copyright 2010 Flowserve Corporation TO REORDER REFER TOB/M or Assy. #Order #Seal TypeFIS206eng REV 07/10 Printed in EuropeTo fin

21. Drawing, Brief Description, Function See the annex for the installation drawing.1.1 Specifications for the operations described herein:Applicati

3Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Partsin both directions, i. e. it seals both from the product side and from

4The fluid must always be present at the seal gaps, so that a seal film can be generated. The seal film exists when the shaft is stationary.The seal f

5Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Partstion, however, must be observed to prevent malfunctions that in turn co

63.2 The copyright on these installation and maintenance instructions is the property of FLOWSERVE. These installation and maintenance instructions a

7Mixerpac 2564 - Installation and Maintenance Instruction for Machinery PartsFLOWSERVE and will lead, without special tools, to damage. ! Vibrations

8 Installation of the MIXERPAC on the machine may take place during machine breakdown only.6.2 The MIXERPAC must always be installed with the install

9Mixerpac 2564 - Installation and Maintenance Instruction for Machinery Parts7.0 Connecting the Seal Support System 7.1 The MIXERPAC is connected