Flowserve MEN Manual do Utilizador descarregar pdf (Página 35)

MEN USER INSTRUCTIONS ENGLISH 71576288 - 02/13

Page 35 of 36

flowserve.com

8.2 Sectional drawings part list

ITEM DESIGNATION

1110 Pump casing

1221-01

Casing cover with stuffing

box

1221-02

Casing cover with

mechanical seal

1500 Wear ring (optional)

2110 Pump shaft

2250 Radial flow impeller

2450 Shaft sleeve

2540 Thrower

2905 Plain washer

2912 Self-braked nut

3011 Radial ball bearing

3134 Support foot

3200 Bearing housing

3260 Bearing cover

4120 Gland

4130 Gland packing

4131 Follower

4200 Mechanical seal

4590-01

Gasket (if fitted with BSP

pipe plugs)

4590-02

Gasket (if fitted with BSP

pipe plugs)

4590-03 Special ring

6511 Priming plug

6515 Drain plug

6544 Circlips

6572 Stud

6577-01 Hexagon bolt

6577-02 Hexagon bolt

6577-03 Hexagon bolt

6581 Hexagon nut

6700-01 Key

6700-02 Key

9331 Cover plate

BSP: British Standard Pipe

8.3 General arrangement drawing

The typical general arrangement drawing and any

specific drawings required by the contract will be sent

to the Purchaser separately unless the contract

specifically calls for these to be included into the

User Instructions. If required, copies of other

drawings sent separately to the Purchaser should

be obtained from the Purchaser and retained with

these User Instructions.

9 CERTIFICATION

Certificates determined from the Contract

requirements are provided with these instructions

where applicable. Examples are certificates for CE

marking, ATEX marking etc. If required, copies of

other certificates sent separately to the Purchaser

should be obtained from the Purchaser for

retention with these User Instructions.

10 OTHER RELEVANT

DOCUMENTATION AND MANUALS

10.1 Supplementary User Instructions

Supplementary instructions such as for a driver,

instrumentation, controller, seals, sealant system

etc are provided as separate documents in their

original format. If further copies of these are

required they should be obtained from the supplier

for retention with these User Instructions.

10.2 Change notes

If any changes, agreed with Flowserve, are made to

the product after its supply, a record of the details

should be maintained with these User Instructions.

10.3 Additional sources of information

Reference 1:

NPSH for Rotor dynamic Pumps: a reference

guide, Euro pump Guide No. 1, Euro pump &

World Pumps, Elsevier Science, United Kingdom,

1999.

Reference 2:

Pumping Manual, 9

edition, T.C. Dickenson,

Elsevier Advanced Technology, United Kingdom,

1995.

Reference 3:

Pump Handbook, 2

edition, Igor J. Karassik et al,

McGraw-Hill Inc., New York, 1993.

Reference 4:

ANSI/HI 1.1-1.5, Centrifugal Pumps -

Nomenclature, Definitions, Application and

Operation.

Reference 5:

ANSI B31.3 - Process Piping.

1 2 ... 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários

Flowserve MEN Manual do Utilizador Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Bombas Flowserve MEN