Flowserve Valtek Mark One K-Bellows Sealed Globe Valves Manual do Utilizador descarregar pdf

User Instructions

Experience In Motion

Valtek Mark One K-Bellows Sealed

Globe Valves

Hydroformed metal bellows seal for extended service life

FCD VLAIM0065–00 01/06

Installation

Operation

Maintenance

1 2 3 4 5 6 7 8

User Instructions Experience In Motion Valtek Mark One K-Bellows Sealed Globe Valves Hydroformed metal bellows seal for extended service life FCD

Valtek Mark One K-bellows 2 1. GENERAL INFORMATION 1.1 Using The following instructions are designed to assist in disassembling, reassembling and t

Valtek Mark One K-bellows 3 3. The user must provide fire protection. 1.7 Spare Parts Use only FLOWSERVE original spare parts. FLOWSERVE cannot acc

Valtek Mark One K-bellows 4 Figure 1: Mark One with K-Bellows Note: Item numbers correspond directly to the valve's bill of material.

Valtek Mark One K-bellows 5 bolting. Once the yoke clamps are off remove the air from the actuator. This will cause the yoke and bonnet to separat

Valtek Mark One K-bellows 6 3.4 If the packing has been removed, replace packing spacer, packing and upper stem guide (refer to Figure 1). 3.5 Ins

Valtek Mark One K-bellows 7 the plug to the mid-stroke position and proceed to tighten. WARNING: Failure to return the plug to the mid-stroke positi

Experience In Motion Regional Headquarters Flowserve America 1350 N. Mt. Springs Prkwy. Springville, UT 84663 USA Telephone: +1 801 489 8611 Fax: +

Sem comentários

Flowserve Valtek Mark One K-Bellows Sealed Globe Valves Manual do Utilizador