Flowserve SR Series Limitorque Manual do Utilizador

USER INSTRUCTIONSInstallationOperationMaintenanceLimitorqueTM SR SeriesFCD LMENIM3701-00-AQ 11/14Experience In Motion

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1410Flowserve Limitorque SR gearboxes are shipped with the following lubricants: Table 3.1 – Lubricants

11Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com4 Product WeightsSR and SRH Gearbox WeightsBasic GearboxLbs KgSR200 110 50SR300 154 70S

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1412c WARNING: See Section 2.4 Safety Precautions and 2.5 Safety Practices before undertaking the step

13Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com9. Separately, remove the upper O-ring (pc# 15) and lower Oil Seal (pc# 25) from the H

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/141411. Place the Gasket (pc# 22) in position on the Base (pc# 2).12. Separately, install the upper O

15Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.comFigure 5.1 - SR200 - SR600 Assembly View 41212111117112913143615152292221252581028775

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1416Item No. Description QTY16 INTERMEDIATE HELICAL GEAR 117 INTERMEDIATE HELICAL PINION 118 N/A N/A19

17Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com5.2 Disassembly and Reassembly of SR200H through SR600HDisassembly InstructionsRefer

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/141824. Remove the Gasket (pc# 32) from the Thrust Housing (pc# 37).a CAUTION: Care must be taken to

19Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com20. Install the lower Radial Ball Bearing (pc# 11) and Input Shaft & Pinion (pc# 4

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/142Contents1 Introduction 4 1.1 Purpose 4 1.2 User Safety 42 Inspection, Installation and Mount

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1420Figure 5.2 - SR200H – SR600H Assembly View25810251121233533323134411112916171115143613352728269242

21Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.comItem No. Description QTY20 SET SCREW 121 PIPE PLUG 122 GASKET 123 EYE BOLT 224 KEY 125

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1422To order parts or obtain further information for your Limitorque SR Series, contact your local Limi

23Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com

flowserve.comTo find your local Flowserve representative, visit www.flowserve.com, www.limitorque.com, or call 1 800 225 6989FCD LMENIM3701-00-A

3Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.comFiguresFigure 2.1 – SR Exploded View 5Figure 2.2 – SRH Exploded View 6Figure 5.1 – SR2

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1441.1 PurposeThe installation and maintenance manual (IOM) explains how to install and maintain the Fl

5Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com2 Inspection, Installation and Mounting ProceduresFigure 2.1 - SR Exploded Viewc W

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1462.1 Initial Inspection and Storage Instructionsc WARNING: Read this installation and maintenance m

7Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com2.3 Storage ProcedureNOTE: The following is the recommended storage procedure to reta

Limitorque SR Series FCD LMENIM3701-00-AQ - 11/1482.6.1 Installing a Gearbox with a Threaded Stem Nut – SR200 through SR600 and SR200H throu

9Limitorque SR Series FCD LMENIM3701-00-AQ - 11/14flowserve.com8. Install the Stem Nut (pc# 5) into the Thrust Housing (pc# 37) and upper Thrust Rolle