Flowserve SPECTORcontrol Manual do Utilizador descarregar pdf (Página 46)

Controller Menu – continued –

Continuous controller setup - continued -

11. The green input field Position shows the position indicator. To select a position feed-

back signal, click in the green input field. All adjusted signals will be indicated.

12. Select the signal that indicates the required parameters. For more information on the

setup and configuration of the equipment see menu CAN Input and Analog Input.

13. The green input field Offset shows the current value. To enter or change a value click

in the input field.

14. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

15. The green input field MIN limit shows the current limit. To enter or change a value

click in the input field.

16. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

17. The green input field MAX limit shows the current limit. To enter or change a value

click in the input field.

18. The adjusted value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

19. To configure the controller press button .

Note

The MIN and MAX limit values specify the admissible manipulated variable.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Sem comentários

Flowserve SPECTORcontrol Manual do Utilizador Página 46