Flowserve SoftTools Suite 7.0 Manual do Utilizador descarregar pdf (Página 8)

VLAUG001-00 ©Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 8 of 21

3. Click on the Configurator toolbar button for direct access to the Configurator

window.

The Configurator window contains three tabs: Actuator, Positioner, and Valve. Click on

each tab to select and configure the settings for each component.

Figure 3 TechCheck Configurator window (Actuator Configuration Tab shown)

Click on the Actuator tab to display the Actuator Configuration screen. Check to make

certain the actuator information and actions are set correctly.

1. From within the Actuator screen, click on each combo box to ensure that the

selections correspond to the installed actuator information.

2. From within the Mechanical Action screen, click on each combo box to ensure that

the selections correspond to the mechanical configuration of the device.

WARNING! Incorrect settings and/or overriding the DIP switches on the Logix positioner

may cause the valve to stroke suddenly or become unstable.

Click on the Positioner tab to display the Positioner configuration screen. Click on each

representative button to view and/or edit the configurable settings displayed within their

respective windows.

Figure 4 TechCheck Configurator window (Positioner configuration tab shown)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Sem comentários

Flowserve SoftTools Suite 7.0 Manual do Utilizador Página 8