Flowserve ISC2PP Manual do Utilizador descarregar pdf (Página 2)

1 Nomenclature

Notes: - Inboard stator (3A) is interchangeable with outboard stator (3).

- Inboard mating ring (3C) is interchangeable with outboard mating ring (3B).

- Inboard stator carrier (SC1) is interchangeable with outboard stator carrier (SC).

- Primary seal O-rings (P, P1, P2, P3, 6, 6A) are all the same size and cross section.

Figure 1

SL 6A P3

SC1

RR M

1CP

3C 3A

13 9

SCP26141B

11A

3B KCT13AB

11 10A

3 Outboard Stator

3A Inboard Stator

3B Outboard Mating Ring

3C Inboard Mating Ring

C Outboard Springs

C1 Inboard Springs

SC Outboard Stator Carrier

SC1 Inboard Stator Carrier

P Outboard Dynamic O-ring

P1 Inboard Dynamic O-ring

P2 Outboard Stator O-ring

P3 Inboard Stator O-ring

6 Outboard Mating Ring O-ring

6A Inboard Mating Ring O-ring

G Gasket

G1 Inner Gland O-ring

Table 1

1 Gland Assembly

B Carbon Bushing

1B Inner Gland

14 Rotor Carrier

RR Retaining Ring

CT Centering Tab

K Centering Tab Cap Screw

SL Sleeve Assembly

10A Drive Ring

M Outboard Vibration Dampner

M1 Inboard Vibration Dampner

9 Sleeve Collar

13 Cup Point Set Screw

13A Quarter Dog Set Screw

11 Shaft O-ring

11A Rotor Carrier O-ring

These instructions are written for trained, experienced technicians familiar with the basic

principles and tools involved in the installation, care and service of mechanical seals and seal

support systems. A complete reading of these instructions by personnel in contact with the

equipment is essential to safety. Incorrect installation, operation or maintenance can result in

personal injury or death to personnel and damage to the equipment.

1 2 3 4 5 6 7 ... 11 12

Comentários a estes Manuais

Sem comentários

Flowserve ISC2PP Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flowserve ISC2PP