Flowserve PMV D3 Digital Positioner Manual do Utilizador descarregar pdf (Página 42)

• Tighten the screws F, on the cam assembly.

Do not tighten the screws to hard. The cams

should be able to move in relation to each

other.

• Install the inner cover with the two screws,

• Connect the wiring for the transmitter feed-

back on the terminal block, according to the

drawing on next page.

• Adjust the position where the switches/

sensors should be affected, by turning the

cams with a screwdriver.

• Tighten the cam assembly screws F when

the cams are correctly adjusted.

• Install the indicator and cover.

To calibrate the feedback transmitter, see

drawing on next page.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Sem comentários

Flowserve PMV D3 Digital Positioner Manual do Utilizador Página 42