Flowserve MX Actuators Manual do Utilizador

Quick Setup for Accutronix MX Actuators.D$"//"7BMWFT.D$"//"7BMWFT.D$"//"7BMWFT-JNJUPSRVF"DUVBUJPO4ZTUFNT-JNJU

For More InformationFor in-depth instructions for setup and operation of your MX actuator, see Bulletin LMENIM2306, Installation and Operation for MX-

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve produc

The MX actuator’s 32-character LCD display provides easy-to-read actuator status, diagnostics, and setup information—in the language you choose. Once

Checking the Open/Closed Settings • Valve Closed As you close the valve using the actuator, make sure that the close light (green) illuminates just

Connect Power to the Unit. Refer to the nameplate on the actuator for the correct voltage for the main power supply. Or connect an auxiliary 24 VDC su

Use the black control knob to answer the following prompts:sEtUP? . . . . . . . . . . . . . . . .chaNgE sEttINgs? . . .ENtEr PasswOrd. . . . . .Toggle

Set Position Limits for Electrical Operation4 Set closed valve position. At the cLOsE VaLVE-OK? prompt, move the red control knob to . Hold the blac

Set Position Limits for Manual Operation4 Set close position. At sEt cLOsE POsItION LIMIt? answer . At cLOsE VaLVE-OK? depress declutch lever and sl

Set Actuator OptionsNetworks7 Change Networks menu. At the chaNgE sEttINgs? prompt, select and enter your password. Toggle through the change setti

Modutronic & Analog Position Transmitter (APT)If you have these options, setting the open and close limits will automatically calibrate zero and s