Flowserve MX-100 Field Unit Manual do Utilizador descarregar pdf (Página 33)

MX/DDC-100 Field Unit Installation and Maintenance FCD LMENIM2329-01 – 03/11

ﬂowserve.com

4. Apply heat shrink tubing to insulate the drain wire and to provide stress relief to the cable as shown in

Figure 3.5.

Figure 3.5 – Applying heat shrink tubing

CAUTION: a Do not melt the insulation.

NOTE: Ungrounded drain wires should be cut even with the cable sheath. The brand foil and drain wire should have

heat shrink tubing applied.

5. Install ring tongue connectors as shown in Figure 3.6.

Flowserve recommends the use of Thomas & Betts #RZ22-6 for optimum results.

Figure 3.6 – Ring tongue connectors

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 65 66

Sem comentários

Flowserve MX-100 Field Unit Manual do Utilizador Página 33