Flowserve LY Series Limitorque Manual do Utilizador descarregar pdf (Página 9)

Limitorque LY Series: LY 1001, LY 2001 and LY 3001 FCD LMENIM1501-00 – 11/11

ﬂowserve.com

Preparation

1. Connect internal heaters, if supplied.

2. Replace all plastic caps or plugs with metal pipe plugs.

3. Ensure all covers are tight.

LY Storage Orientation

1. Store with the Control Compartment Cover (Limit Switch compartment) facing upward. Do not

store units on their side.

2. Store off the ﬂoor on suitable skids and cover with an unsealed dust cover leaving the bottom open

and air holes in the side.

Storage Inspection and Correction

1. Perform a semi-annual visual inspection. A minimum inspection should include checking the

following:

 •Packaging  •Plugs

 •Covers  •Dryness

 •Cleanliness  •Heatsource(ifused)forproperfunctioning

2. Record and correct deﬁciencies noted during inspection.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Sem comentários

Flowserve LY Series Limitorque Manual do Utilizador Página 9