Flowserve Limitorque QXM Linear Base Manual do Utilizador

USER INSTRUCTIONSInstallation Operation MaintenanceExperience In MotionMXa/QXM Linear BaseFCD LMENIM2315-00 – 6/14

MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14102.1.4 Assembly or Adjustment of Optional Stop Nut for LB SubassemblyQXM, MX-10 and MX-40 only.NOTE: Th

11MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14flowserve.com2.1.5 LB LubricationStep 1Thrust base assembly (#5) lubrication. Using only Mobil SHC 220

To find your local Flowserve representative, visit www.flowserve.com, www.limitorque.com or call USA 1 800 225 6989.flowserve.comFlowserve Corporation

MXa/QXM Linear Base FCD LMENIM2315-00 – 6/142Contents1 Subassembly Instructions 31.1 LB Subassembly, QXM and MX Units 31.1.1 Optional LB Subass

3MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14flowserve.com1 Subassembly Instructions1.1 LB Subassembly, QXM and MX Units1.1.1 Optional LB Subassem

MXa/QXM Linear Base FCD LMENIM2315-00 – 6/1441.1.2 Optional LB FA or EN (F) Base and Stop Nut SubassemblyNOTE: The EN (F) base meets standard DS/EN

5MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14flowserve.com1.1.3 Removal of Thrust Base Subassembly From LB AssemblyStep 1Remove the four bolts (#4) t

MXa/QXM Linear Base FCD LMENIM2315-00 – 6/1461.1.4 Disassembly of LB SubassemblyStep 1Loosen the two clamps (#7) that secure the bellows boot in pla

7MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14flowserve.com2 Reassembly Instructions2.1 LB Reassembly2.1.1 Reassembly of Optional LB SubassemblySee

MXa/QXM Linear Base FCD LMENIM2315-00 – 6/1482.1.2 Reassembly of Thrust Base to LB SubassemblySee Figure 1.3 for the following steps. Step 1If requi

9MXa/QXM Linear Base FCD LMENIM2315-00 – 6/14flowserve.comFigure 2.1 – LB1 Subassembly Cross-SectionFigure 2.2 – LB2 Subassembly Cross-Section