Flowserve NRS1-8 Manual do Utilizador descarregar pdf (Página 12)

Tools

n Screwdriver (5.5/100)

Attention

n To provide sufﬁcient ventilation, ensure a minimum spacing of 20 mm between

adjacent units.

Installation

NRS 1-8

On supporting rail (with mounting clip)

1. Clip level switch onto supporting rail.

2. Loosen cover screws

A and unplug cover C from its base B.

3. Select cable entry

E / F and remove corresponding seal.

On mounting panel

1. Loosen cover screws

A and unplug cover C from its base B.

2. Unscrew mounting clip

3. Drill the hole

G marked in the base to ∅ 4.3 mm.

4. Fasten base with two screws M4 onto mounting panel.

A Cover screws

B Base

C Cover

D Mounting clip

E Cable entry (ﬂexible)

F Cable entry (housing)

G Hole d = 4.3 mm

H Supporting rail 35 x 15 mm to DIN EN 50022

Key

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Flowserve NRS1-8 Manual do Utilizador Página 12