Flowserve 90 Series Limit Switch Kit Manual do Utilizador descarregar pdf (Página 4)

4. OPERATION

a. Once the M.A.S. unit has been assembled and connected to the

actuator, the switch cams can be set per user’s requirements.

Normally switch I (and III) indicates “closed” and switch II (and

IV) indicates “open.”

b. FOR P6 and P8: Loosen the #4-40 screws used to mount the

switch adjustment plate. Set the switches such that the cams will

approach the switch face as closely as possible without making

contact. Retighten the screws.

c. The unit should be operated to ensure that switch actuation

occurs at the end of rotation (or in whatever position is desired by

the customer) repeatably.

Flow Control Division

Worcester Controls

4 Limit Switch Kit for Series 90 Modular Accessory System WCAIM2044

M2 Without Positioner/Controller Option M2 With Positioner/Controller Option

See

paragraph

3.d

1 2 3 4 5 6 7 8

Sem comentários

Flowserve 90 Series Limit Switch Kit Manual do Utilizador Página 4